搜索
News Center
Location:
Homepage
-
-
-
Talking about the explanation of the reason for the cutting edge of the slitting machine

Talking about the explanation of the reason for the cutting edge of the slitting machine

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2020-01-02
  • Views:0

(Summary description)Talking about the explanation of the reason for the cutting edge of the slitting machine.

The slitting machine is stretchable, the tension of the rewinding and unwinding is not well controlled, and the rewinding should be automatically applied with a relatively constant tension as far as possible. If the slitting machine has jumped edges, it may be that maintenance and maintenance work has not been carried out.

In order to ensure that the slitting machine is always in a good technical condition, it can be put into operation, reduce the downtime of the machine, increase the mechanical integrity, utilization, reduce mechanical wear, increase mechanical life, reduce mechanical operation and maintenance costs, and reduce production. Strengthen the maintenance of machinery and equipment.

The maintenance of the slitting machine must implement the principle of "equal attention to maintenance and precautions", to ensure regular maintenance, compulsory maintenance, and correct handling of the relationship between use, maintenance and repair.

The maintenance of the slitting machine must ensure the quality, and proceed item by item according to the specified items and requirements, and shall not miss or fail the guarantee. Maintenance items, maintenance quality, and problems found during maintenance should be recorded and reported to the dedicated staff of this department.

Each team must complete the maintenance of different machinery in accordance with the mechanical maintenance regulations and maintenance categories, and shall not be delayed without cause. In other cases, the maintenance can be postponed only after the approval of the special engineer in charge, but generally shall not exceed half of the prescribed maintenance interval. By doing the above points, the chance of cutting edge jumping will be much reduced.

Talking about the explanation of the reason for the cutting edge of the slitting machine

(Summary description)Talking about the explanation of the reason for the cutting edge of the slitting machine.

The slitting machine is stretchable, the tension of the rewinding and unwinding is not well controlled, and the rewinding should be automatically applied with a relatively constant tension as far as possible. If the slitting machine has jumped edges, it may be that maintenance and maintenance work has not been carried out.

In order to ensure that the slitting machine is always in a good technical condition, it can be put into operation, reduce the downtime of the machine, increase the mechanical integrity, utilization, reduce mechanical wear, increase mechanical life, reduce mechanical operation and maintenance costs, and reduce production. Strengthen the maintenance of machinery and equipment.

The maintenance of the slitting machine must implement the principle of "equal attention to maintenance and precautions", to ensure regular maintenance, compulsory maintenance, and correct handling of the relationship between use, maintenance and repair.

The maintenance of the slitting machine must ensure the quality, and proceed item by item according to the specified items and requirements, and shall not miss or fail the guarantee. Maintenance items, maintenance quality, and problems found during maintenance should be recorded and reported to the dedicated staff of this department.

Each team must complete the maintenance of different machinery in accordance with the mechanical maintenance regulations and maintenance categories, and shall not be delayed without cause. In other cases, the maintenance can be postponed only after the approval of the special engineer in charge, but generally shall not exceed half of the prescribed maintenance interval. By doing the above points, the chance of cutting edge jumping will be much reduced.

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2020-01-02
  • Views:0
Information
Talking about the explanation of the reason for the cutting edge of the slitting machine.
 
       The slitting machine is stretchable, the tension of the rewinding and unwinding is not well controlled, and the rewinding should be automatically applied with a relatively constant tension as far as possible. If the slitting machine has jumped edges, it may be that maintenance and maintenance work has not been carried out.
 
       In order to ensure that the slitting machine is always in a good technical condition, it can be put into operation, reduce the downtime of the machine, increase the mechanical integrity, utilization, reduce mechanical wear, increase mechanical life, reduce mechanical operation and maintenance costs, and reduce production. Strengthen the maintenance of machinery and equipment.
 
       The maintenance of the slitting machine must implement the principle of "equal attention to maintenance and precautions", to ensure regular maintenance, compulsory maintenance, and correct handling of the relationship between use, maintenance and repair.
 
       The maintenance of the slitting machine must ensure the quality, and proceed item by item according to the specified items and requirements, and shall not miss or fail the guarantee. Maintenance items, maintenance quality, and problems found during maintenance should be recorded and reported to the dedicated staff of this department.
 
       Each team must complete the maintenance of different machinery in accordance with the mechanical maintenance regulations and maintenance categories, and shall not be delayed without cause. In other cases, the maintenance can be postponed only after the approval of the special engineer in charge, but generally shall not exceed half of the prescribed maintenance interval. By doing the above points, the chance of cutting edge jumping will be much reduced.

Scan the QR code to read on your phone

Recommended News

Contact Us

An enterprise that integrates design, production, processing, and sales, and specializes in the production of intelligent machinery. Have modern production management experience and professional technical personnel.

Address:No.9, Zhujin ,Third Street , Zhujin Industrial Zone, LongHu District ,Shantou city,Guangdong , China

Mobile/Wechat/Whatsapp/Facebook

0086-15018366136 ,Mr Mike Wu

Mobile/Wechat/Whatsapp/Facebook

0086-13802331661, Mr Jack Chen

Hongsheng Technology

Mobile Site

Hongsheng Technology

WeChat Account

Copyright ? 2021  Guangdong Hongsheng Technology Co., Ltd.  Power by : www.300.cn 粤ICP备2021090389号

k8凯发国际 360彩票 易彩堂 广东十一选五 彩票app u米彩票